Marshall JCM2000 DSL100HR + Marshall MX412AR Cabinet

IDR 17,400,000.00

Description

Marshall JCM2000 DSL100HR

Marshall's Legendary DSL Returns


Tap into burly Marshall tone anywhere from your bedroom to the stage, with the Marshall DSL100HR tube amplifier. With per-channel Gain and Volume controls, a dedicated Resonance control, reverb, and an effects loop, the DSL100HR is ready to gig. And with its adjustable power level, you can dial in cranked-amp tones that won't wake your neighbors — or even use the Softube speaker-emulated output for direct recording and monitoring. Marshall even refined the DSL100HR tube head's EQ section for extremely versatile tone shaping.

100 watts of Primal Marshall Tone

Marshall's DSL100HR is an all-tube, twin-channel beast capable of conjuring any classic Marshall sound — past or present. Four ECC83s in the preamp section (in concert with the amp's gain/master volume arrangement) give you stunning tone-shaping mojo, and with four EL34s in the engine room, you've got the volume to rule any stage in the world. Sporting, in fact, precisely the same tube complement and feature set as the original DSL100, this monster has critical upgrades that give you even more control over your sound. You now get a Resonance control (as opposed to the original's fixed deep switch), letting you dial in your preferred amount of low-end girth. You also get studio-grade digital reverb (instead of spring), high and low power settings, and an effects loop. Marshall has even included a 2-way footswitch for channel switching and FX loop on/off.

The DSL Series — a Revered Tonal Heritage

The Marshall DSL100HR hails from a revered lineage. Marshall introduced the JCM2000 Dual Super Lead (DSL) series amps in 1997. Right from the get-go, these all-tube monsters enjoyed enthusiastic approval by guitarists and the press alike, forming the backlines of top acts in all musical genres and bludgeoning audiences worldwide for a decade before being replaced by Marshall's JVM series (a musical powerhouse in its own right). Considered the go-to rock amp by many tone-savvy guitarists, there is considerable pent-up demand for Dual Super Leads. And thus, Marshall is proud to introduce the new-and-improved DSL series.

Softube Speaker-Emulated Output

Marshall has teamed up with software mavens Softube to create exceptional tones in their CODE series of amplifiers, and they've joined forces again on the DSL100HR. Its line output features an accurate emulation of Marshall's iconic 1960 speaker cabinet, allowing you to plug directly into a recording chain with confidence. Guitarists at Sweetwater love flexible recording options, and the DSL100HR delivers.

Marshall DSL100HR Tube Amp Head Features :

  • Capable of conjuring any classic Marshall sound — past or present
  • 2 channels — Classic Gain and Ultra Gain
  • Each channel features two modes — Clean/Crunch and OD1/OD2, respectively
  • High and low power modes allow you to dial in appropriate volume for any setting
  • Line output with Softube's accurate emulation of a Marshall 1960 cab
  • Highly effective Resonance control replaces the original's fixed deep switch
  • Refined EQ section gives you incredible tonal flexibility
  • Studio-grade digital reverb
  • Bypassable rear-panel series effects loop
  • Included 2-way footswitch for channel switching and FX loop on/off

Tech Specs :

  • Type : Tube
  • Number of Channels : 2-channel (2 modes each)
  • Total Power : 100W (50W power setting)
  • Preamp Tubes : 4 x ECC83
  • Power Tubes : 4 x EL34
  • Reverb : Classic, Ultra
  • EQ : 3-band EQ, Tone Shift, Resonance
  • Inputs : 1 x 1/4" (instrument), 1 x 1/8" (aux in)
  • Outputs : 2 x 1/4" (4 ohm), 2 x 1/4" (8 ohm), 1 x 1/4" (16 ohm), 1 x 1/4" (Softube emulated out)
  • Effects Loop : Yes
  • MIDI I/O : In
  • Footswitch I/O : 1 x 1/4" (channel, effects loop)
  • Footswitch Included : Yes, 2-button footswitch (optional 6-way sold separately)
  • Bias Type : Adjustable Fixed
  • Power Source : Standard IEC AC cable
  • Height : 10.7"
  • Width : 29.1"
  • Depth : 9.5"
  • Weight : 53.3 lbs.
Marshall MX412AR Cabinet

The Perfect Match for Your DSL Head

The Marshall MX412AR is the perfect complement to your DSL100HR head. This angled 4 x 12" extension cabinet is loaded with a quartet of Celestion G12E-60 speakers, which yield a muscular British sound with open cleans, brutal crunch, and singing leads. On top of that, its angled speaker baffle delivers maximum sound projection. Hook it up, and you'll experience full lows, creamy mids, and chiming highs. No matter what style of music you're playing, the MX412AR will bring out the best in your amplifier. Complete with the iconic Marshall logo, the MX412AR is a great way to expand your DSL's capabilities.

The G12E-60 is a Classic-Sounding Celestion with Epic Power Handling

Celestion's G12E-60 gives you classic British tone, with enough power handling for today's powerhouse amps. In the 1960s, Celestion's original Greenback speakers helped shape generations of guitar tone and became a staple of modern music. With its warmth and distinctive growl, the G12E-60 serves up the essence of British guitar tone, with low-end grunt complementing its warm mids, crunchy upper-mids, and sweet highs. When we're searching for the definitive Celestion sound here at Sweetwater, we reach for the G12E-60.

Marshall MX412AR Features :

  • 4 x 12" extension cabinet voiced for DSL100HR heads
  • Celestion G12E-60 speakers yield a muscular British sound with open cleans, brutal crunch, and singing leads
  • Exhibits warm mids, crunchy upper-mids, and sweet highs
  • Angled speaker baffle delivers maximum sound projection
  • Compliments any style of music and brings out the best in your amplifier
  • Features the iconic Marshall logo

Tech Specs :

  • Configuration : 4 x 12"
  • Powered : No
  • Speakers : Celestion G12E-60
  • Power Handling : 240W
  • Impedance : 16 ohms
  • Mono/Stereo : Mono
  • Cabinet Type : Slant
  • Open/Closed Back : Closed
  • Inputs : 1 x 1/4"
  • Construction Material : MDF, Black Tolex
  • Height : 29.5"
  • Width : 29.9"
  • Depth : 14.1"
  • Weight : 68.1 lbs.
  • Manufacturer Part Number : M-MX412AR-U
Available
Any questions? Contact us